T2004 Multi-Control Head System Features

• Between one and five control heads on a single T2020 or T2040 transceiver


• Each control head can be installed anywhere on a multi-drop line up to 2000m long


• Control heads are configured as one "primary" and up to four "secondaries"


• Primary/Secondary control head selection. (One control head is designated at the primary - not user selectable)


• Global muting function (used where control heads are co-located or audio feedback is possible between two or more control heads-not user selectable)


• Two settings can be made on the control head PCB


• Access to the control head links is through the rear connector cover on the control head


• Primary control head replaces the existing fixed head on your T2020/T2040

T2004 Multi-Control Head System Specifications

• Maximum recommended length of the multi drop cable is 2000m


• T2040 and all T2020 transceivers supported


• Between one and five control heads


• DC supply connector and speaker connector for control heads
  - Phoenix 4-way socket
  

Primary control head controls the power to the system Radio interface PCB requires no setup 8-way multi pair cable makes up the multi-drop line which has R45 wall mounting boxes at the required points on the line Four metre R45 to Micromatch connector leads connect the control heads and transceiver to the line Control heads are each powered locally by a mains operated DC plug pack A speaker plugs into each control head to provide local TX and RX audio Transceiver can be concealed if required Line level: Preset to -10dBm for receiver audio, -15dBm for transmitter audio Control head: Standard T2000 control head dimensions Control head: Standard T2000 control head dimensions DC supply voltage for control heads (0mA): +13.8V nominal +10.8V minimum +16V maximum